Overview
Combine the holding power of Invert-A-Bolt™ fasteners with the locating capability of bushing/ pins to get a low cost, high precision, totally un-obstructed, quick change setup. Are you having trouble getting a quick-change mounting system that's affordable? Why not try the ZipFixture™* low-cost alternative. Accuracy is not compromised and is significantly lower cost.

• Compare to Carr-Lane, Schunk, & Big Kaiser Zero Point Mounting Systems at 96% lower cost
  Equivalent Zero-Point Mounting system costs approx. $1450** per locator
• Compare to Jergens Ball Lock™ Mounting System at 60% lower cost and more flexibility
  Equivalent Jergens system costs approx. $130*** per locator
• Uses a 1.25-1.50" thick Sub-Plate
• Can be used with any thickness fixture plate .5" and up
• Absolutely no obstructions to the fixture plate
• Change fixtures in 60 seconds or less using a pneumatic wrench
• Repeatablility: +/-.0004" to +/-.0008"
• Same great holding power as used in high-speed machining by Invert-A-Bolt™ fasteners
• Use to locate/hold vise setups--same great holding power as used in high-speed machining