Want the BEST Modular Fixturing solution? Get a Universal Common Modular Fixture

Invert-a-bolt(tm) fasteners and products are the revolutionary new way to hold parts during machining. These tooling components will change the way you machine parts. These tooling products are primarily used in lean manufacturing applications as well as for high-speed machining.

TOLL FREE 877-462-BOLT


Click here for specific configurations, specifications & 3D downloads	Invert-A-Bolt™ (IVB) Universal Common Modular Fixtures (UCMF) are typically used in a lean manufacturing environment, especially for high-speed machining. These unique fixtures, loaded on a tombstone type tooling block, can be used to tool for multiple machining operations all in one setup. The cost savings derived from using Invert-A-Bolt™ Universal Common Modular Fixtures are numerous and especially applicable in a "lean" manufacturing environment: • Elimination of tool design of dedicated fixtures • Elimination of manufacture of dedicated fixtures • Elimination of storing & maintaining dedicated fixtures • Elimination of tool rework for engineering changes to part definition • Elimination of duplicate fixturing • Elimination of capital investment represented by dedicated fixturing • Establishment of standardized work holding techniques • Opportunity to benefit from "quick-change" pallet solutions • Opportunity to benefit from the Invert-A-Bolt™ fasteners unique holding solution: ease of programming, reduced setup times, reduced obstruction to machining, and characteristics that allow for special use situations	Hit the "Play" button for important information

Invert-A-Bolt™ (IVB) Universal Common Modular Fixtures (UCMF) consist of a tooling plate with multi-purpose holes (bushed and in-line threaded holes) and IVB fastener locations. This flat plate fixture is ideal for machining just about any kind of part, either from raw stock, casting, forging or other configuration. Raw stock ("picture framed") parts can be located with the bushings and held by IVB fasteners. Castings, forgings and other configurations can be held/located using modular fixturig components at the the multi-purpose hole locations.

Invert-A-Bolt™ Universal Common Modular Fixtures** are constructed from Grey Cast Iron, ASTM Class 40 or as specified by the customer. Fixtures consist of Invert-A-Bolt™ fasteners and bushed (or multi-purpose holes) set on typical centers. Each fixture includes lift holes, Sine Key and/or locator key holes (for location of fixture plate), cap screw holes (for hold down to the baseplate or machine bed) as well as scribed information for row and column designations. The tolerances employed vary based upon the size of the fixture, but typically the thickness is held +/- .0015" holding flatness and parallelity as close as possible. Sine Key locations are set on both the Horizontal and Vertical axes. All locations for bushings and sine key holes are typically held +/-.001" from Horizontal and Vertical Center Lines. These fixtures can be attached to your tombstone or turnkey the whole setup through us!

Universal Modular Fixture being Inspected

Part Number	Size of Plate	Fastener / Stud Size	Number of Fasteners	Locator Size	Fastener & Locator Pattern	Bolt Up Pattern	Download Graphic Model?	Purchase
MF-AA03-015-001-500-001	10"x10"x1.9"	AA03-015-001 / 1/2-13"	16	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA03-150-001-625-001	10"x10"x1.9"	AA03-150-001 / 5/8"-11	16	.625"/ 5/8"-11	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA02-300-001-375-003	12"x20"x1.9"	AA02-300-001 / 3/8"-16	70	.375"	1.5" x 1.5" rotated	2" x 2" standard	No	Quoted-Call
MF-AA02-300-001-375-001	16"x20"x1.9"	AA02-300-001 / 3/8"-16	100	.375"	1.5" x 1.5" rotated	2" x 2" standard	No	Quoted-Call
MF-AA02-015-001-500-015	14"x25"x1.9"	AA02-015-001 / 1/2"-13	72	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA02-015-001-375-015	458mm x 596mm x 48.26mm	AA02-015-001 / 1/2"-13	182	.375"	35.36mm x 35.36mm rotated	50mm x 50mm standard	No	Quoted-Call
MF-AA02-015-001-375-009	600mm x 596mm x 48.26mm	AA02-015-001 / 1/2"-13	250	.375"	35.36mm x 35.36mm rotated	50mm x 50mm standard	No	Quoted-Call
MF-AA02-015-001-375-011	24"x24"x1.9"	AA02-015-001 / 1/2"-13	250	.375"	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA03-015-001-500-003	24"x24"x1.9"	AA03-015-001 / 1/2"-13	118	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA03-150-001-625-005	24"x24"x1.9"	AA03-150-001 / 5/8"-11	118	.625"/ 5/8"-11	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA02-015-001-375-001	24"x32"x1.9"	AA02-015-001 / 1/2"-13	288	.375"	1.5" x 1.5" rotated	2" x 2" standard	No	Quoted-Call
MF-AA02-015-001-375-007	25"x33"x1.9"	AA02-015-001 / 1/2"-13	192	.375"	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA02-015-001-500-007	25"x33"x1.9"	AA02-015-001 / 1/2"-13	192	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA03-015-001-500-009	25"x33"x1.9"	AA03-015-001 / 1/2"-13	162	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA03-015-001-500-011	29"x34.6"x1.9"	AA03-015-001 / 1/2"-13	194	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	Yes	Quoted-Call
MF-AA03-150-001-625-003	29"x34.6"x1.9"	AA03-150-001 / 5/8"-11	194	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	Yes	Quoted-Call
MF-AA02-015-001-375-003	24"x48"x1.9"	AA02-015-001 / 1/2"-13	420	.375"	1.5" x 1.5" rotated	2" x 2" standard	No	Quoted-Call
MF-AA02-015-001-500-013	25"x49"x1.9"	AA02-015-001 / 1/2"-13	288	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA03-015-001-500-013	30"x53"x1.9"	AA03-015-001 / 1/2"-13	344	.625"/ 5/8"-11	2" x 2" standard	2" x 2" standard	Yes	Quoted-Call
MF-AA03-150-001-625-013	30"x53"x1.9"	AA03-150-001 / 5/8"-11	344	.625"/ 5/8"-11	2" x 2" standard	2" x 2" standard	Yes	Quoted-Call
MF-AA02-015-001-500-011	18"x96"x1.9"	AA02-015-001 / 1/2"-13	384	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	No	Quoted-Call
MF-AA03-015-001-500-007	90"x78"x1.9"	AA03-015-001 / 1/2"-13	1535	.500"/ 1/2"-13	2" x 2" standard	2" x 2" standard	No	Quoted-Call

**Make to order configurations are available. Call toll free 877-462-BOLT for further information.

• HOME • DOWNLOADS • FAQ's • LINKS • CONTACT US • CATALOG • LEAN MANUFACTURING • ADVANTAGES • APPLICATIONS • TESTIMONIALS • INSTALLATION INFO • RETURNS

• Privacy •

© 1997 - 2008 Elijah Tooling, Inc. All rights reserved.
Invert-a-bolt™, and the Invert-a-bolt™ logo, are trademarks or registered trademarks of Elijah Tooling, Inc. in the United States and other countries.
Since 1990

Have Faith!
7